Converter Products >> HDMI to SDI Converter
Description :
HDMI to SDI Converter
Introduction
The HDMI to 3G SDI converter allows HDMI signals to be shown on SDI displays while ensuring high bit rates of 2.970 Gbit/s to give you high resolution signal without any loss. For professionals this means that it is now easier to convert your high def HDMI signal with audio to 3G SDI for long distance transmission and display your work on two 3G SDI display.
Features :
- Supports HDMI timing: 480i, 576i, 720p50/60, 1080p 24/25/30, 1080i 50/60, 1080p 50/60
- Operation at 2.970 Gbps, 2.970/1.001 Gbps, 1.485 Gbps, 1.485/1.001 Gbps and 270 Mbps
- Simultaneous display HDMI source on two SDI displays
- Integrated audio embedded up to 8 CH PCM 48 kHz for HDMI
- Auto video mode detection (3G/SD/HD)
- Connect with other units (SDI to HDMI) to extend your signal over long distances
- Supports signal transmission distances up to 300M for SD signals, 200 for HD signals and 100 M for 3G signals
- Note: Cable tested with Belden 1694A. Operating distances may vary if used with another type of cable
Specification :
- SDI Transmission Rates: 2.970 Gbps and 2.970/1.001 Gbps 1.485 Gbps, 1.485/1.01 Gbps and 270 Mbps
- Frequency Bandwidth 225 MHz/link (HDMI 1.3)
- In/Output Support Resolution: 480i, 576i, 720p @50/59.94,60; 1080i @50/59.94/60; 1080p @23.98/24/25/29.97/30/50/59.94/60
- Input Port 1 x HDMI
- Output Port 1 x BNC (SDI/HD-SDI/3G-SDI)
- Power Supply 5V DC / 1A
- ESD Protection ±8kV (air-gap discharge)
- Human body model ±4kV (contact discharge)
- SDI Cable Distance: 3G up to 100M (BELDEN 1694A); HD up to 200M (BELDEN 1694A); SD up to 300M (BELDEN 1694A)
- Dimension (mm) 100(W) x 65(D) x 25(H) mm
- Weight (g) 250g
Berat : 300 gram
