Ztek Products >> Ztek SDI to AV Converter
Description :
Ztek SDI to AV Converter
Introduction
This SDI to AV (CVBS) converter alows SD-SDI, HD-SDI and 3G-SDI signals to be shown on normal TV while ensuring high bit rates of 2.970 Gbit/s to give you fast signal transmission without any loss, and there by expensive monitor can be replaced by normal TV.
It also support L/R analog audio output and can be connected to sound system to get perfect music.
Features :
- Operation at 2.970Gbit/s, 2.970/1.001Gbit/s, 1.485Gbit/s, 1.485/1.001Gbit/s and 270Mbits/s
- Equalized and re-clocked loop output
- Auto video mode detection (3G/HD/SD)
- Conversion from SMPTE 425M level B to level A 1080p 50/59. 94/60 4:2:2 10-bit
- Connect with other units to extend yor signal over long distances
- Simultaneously display SDI and AV signals
- 2CH analog audio output
- Supports signal transmission distances up to 300M for SD signals, 200M
- For HD signals and 100M for 3G signals
- Note : Cable tested with Belden 1694A. Operating distances may vary if used with another type of cable
Specifications :
- SMPTE Standard : 425M Level A & B, 424M, 292M, 259M-C
- SDI Transmission Rates : 2.970 Gbit/s and 2970/1.001 Gbit/s
- SDI in/out Resolution – SD : 480i@60, 576i@50. HD : 720p@50 / 60, 180i@50 / 60. 3G : 1080p@24 / 25 / 29.97 / 30 / 50 / 59.94 / 60
- CVBS Output Resolution : PAL/NTSC-M (optional)
- Input Port : 1 x BNC (SD/HD/3G-SDI)
- Output Port : 1 x BNC (SD/HD/3G-SDI), 3 x RCA (CVBS, L/R)
- Power Supply : DC 5V
- ESD Protection Human body model : ±8kV (air-gap discharge), ±4kV (contact discharge)
- Dimension : 80mm x 63mm x 23mm
- Weight : 175g
- Operating Temperature : 0° C~40° C/32° F~104° F
- Storage Temperature : -20° C~60° C/-4° F~140° F
- Relative Humidity : 20~90% RH (Non-condensing)
- Power Consumption (Max) : 2W
Berat : 1000 gram
